Brixwell Beveled Hole In Glass Style Wall Mount Glass Clamp, Brushed Nickel

The Brixwell Beveled Hole-In-Glass style wall mount glass clamp is designed to secure vertical fixed glass panels by mounting directly to a wall, ceiling, or floor. It is manufactured from brass and finished in Polished Brass, with a beveled design style that supports clean edge alignment. This clamp is used for enclosures such as corner, niche, bathtub, and tailor made solutions. It supports glazing thickness from 3/8" to 1/2" and is intended for use with monolithic tempered glass. Glass fabrication is required, with a hole size of 5/8" or 3/4" diameter. The clamp face measures 2" x 2" with a depth of 3/4". Clearance between the glass and the wall ranges from 5/32" to 3/16". Clear silicone can be used to provide a clean, water resistant seal at the glass edge. Mounting screws and gaskets are included, and a cover plate flat head cross head screw is used as the replacement clamping screw if needed. Project measurements from the edge of the glass. Installation steps are 1) Verify glass thickness and required hole size, 2) Drill the specified hole in the glass panel, 3) Position gaskets inside the clamp, 4) Align the clamp with the wall, ceiling, or floor mounting surface, 5) Secure the clamp using the supplied mounting screws, 6) Insert the glass panel into position, 7) Tighten the clamping screw evenly, and 8) Apply clear silicone along the glass edge where required.

• MATERIAL: Made from brass, this beveled wall mount glass clamp supports consistent structure and stable contact at fixed glass mounting points. The brass body works with included gaskets to separate metal from glass.
• FINISH: Polished brass finish provides a bright, uniform surface appearance that coordinates with glass enclosure hardware. The finish is suitable for interior wall, ceiling, or floor mounted glass installations.
• DIMENSIONS: Clamp features a face length of 2", height of 2", and depth of 3/4". Clearance between the glass and wall ranges from 5/32" to 3/16", providing adequate space for sealant while maintaining proper glass alignment.
• GLASS COMPATIBILITY: Designed for monolithic tempered glass with a glazing thickness of 3/8" to 1/2". Glass fabrication is required to create the specified hole sizes for proper installation using the hole-in-glass clamp style.
• MOUNTING TYPE: Wall or ceiling mount design allows the clamp to secure vertical fixed glass panels in corners, niches, bathtubs, or custom enclosures, providing stability and versatility for a wide range of residential and commercial applications.
• HOLE SIZE REQUIRED: Requires a 5/8" or 3/4" diameter hole drilled in the glass panel to accommodate the clamps hole-in-glass mounting style, ensuring secure attachment and proper alignment in the finished installation.
• INSTALLATION NOTES: Mounting screws and protective gaskets are included. Apply clear silicone at the glass-to-wall interface to create a clean, water-resistant seal, preventing leaks while maintaining a polished appearance in glass enclosures.